


Gas Turbine Flow Meter
Introduction
Gas turbine flowmeter is a kind of velocity flow meter that accurately measures gas flow. It has the advantages of simple and light structure, high measurement accuracy, good repeatability, wide measurement range, convenient installation and maintenance, etc. It is widely used in the measurement of various gases such as natural gas, city gas, propane, butane, air, nitrogen and other gases in petroleum, chemical industry, metallurgy, aviation, scientific research and other departments and industrial fields. Due to its high precision and good repeatability, the instrument is suitable for trade measurement and industrial process detection.
When the gas turbine flowmeter is measured online, its medium density changes with the change of temperature and pressure. In order to measure accurately, the temperature and pressure of the medium must be tracked and detected at the same time, and the volume flow under different working conditions must be converted into the volume flow under the standard state or the agreed state.
Since the flowmeter integrates temperature, pressure and flow sensors, tracks and detects the medium temperature and pressure on line, and performs automatic compensation and compression factor correction operation, it has excellent low-pressure and high-pressure metering performance, and is especially suitable for the measurement of various single-phase gases, such as natural gas and other gases. According to different requirements of users, the company provides turbine flow meters with different precision grades.
Specification
Gas Turbine Flow Meter | |
Stainless steel | Aluminum alloy |
Accuracy | 1.5%, 1.0% |
Measuring range | 2.5-6000 m3/h |
Diameter (MM) | DN20-DN300 |
Range ratio | 1:10 , 1:20 |
Output | 4-20mA / Pulse / RS485 |
Press | 1.6Mpa, Option (2.5MPa, 4.0MPa, 6.4Mpa) |
Power | 24VDC or 3.6V Lithium battery |
Connection | Flange(DN20-DN300), Thread (DN20-DN40) |
Conditions of use | A. ambient temperature:-25 ~+80 ℃ B. medium temperature:-20 ~+60 ℃ C. relative humidity: 5-95% D. atmospheric pressure: 86 kpa-106 kpa |
Protection level | IP65 |
Model | Nominal Diameter DN(mm) | Flow Range(m3/h) | Max pressure loss (kPa) | Initial flow (m3/h) | Connection type |
FXGTF-20 | 20 | 2.5-25 | 1 | Flange (thread) | |
FXGTF-25 | 25 | 2.5-25 | 1 | ||
FXGTF-25 | 4-40 | 2 | |||
FXGTF-40 | 40 | 5-50 | 1.8 | ||
FXGTF-50 | 50 | 6-65 | 0.7 | 2.5 | Flange |
FXGTF-50 | 10-100 | 0.7 | 2.5 | ||
FXGTF-80 | 80 | 13-250 | 0.3 | 6 | |
FXGTF-80 | 20-400 | 0.8 | 6 | ||
FXGTF-100 | 100 | 20-400 | 0.2 | 8 | |
FXGTF-100 | 36-650 | 0.5 | 8 | ||
FXGTF-125 | 125 | 35-700 | 0.5 | 12 | |
FXGTF-150 | 150 | 32-650 | 0.4 | 15 | |
FXGTF-150 | 50-1000 | 1.7 | 15 | ||
FXGTF-200 | 200 | 80-1600 | 0.2 | 35 | |
FXGTF-200 | 130-2500 | 0.9 | 35 | ||
FXGTF-250 | 250 | 130-2500 | 0.2 | 40 | |
FXGTF-250 | 200-4000 | 0.5 | 50 | ||
FXGTF-300 | 300 | 300-6000 | 1.5 | 50 |
Feature
-
1) High precision, good repeatability, small pressure loss and good seismic performance;
2) Use high-quality bearings, with small friction resistance, good sealing performance and hand name;
3) Integrating a microprocessor, a flow sensor, a high-precision temperature sensor and a pressure sensor, directly measuring the flow rate, the temperature and the pressure of the measured gas, and automatically performing flow tracking compensation and compression factor correction operation;
4) The instrument has pulse signal and analog signal output, and can directly realize centralized collection and real-time management of computer data through RS485 communication interface or GPRS system.
5) Low power consumption, internal battery power supply or external power supply;
6) It has a real-time data storage function, which can prevent data loss during battery replacement or sudden power failure. In the power failure state, internal data can be stored permanently.
7) It can be used with IC card prepayment system to facilitate trade settlement.
Application
Gas turbine flow meter is very popular in air measurement, natual gas measurement. It can equip with a lube module which can inject lube to the impeller, this module can make gas turbine flow meter provide a longer service life. Dual power can meet various of working sites.