Gas Ultrasonic Flow Meter

Gas ultrasonic flowmeter is an accurate and stable instrument for measuring most kinds of dry gases, it doesn’t need any maintenance .

Email: info@felixmeter.com

Send Email Inquiry Now

Introduction
Specification
Feature
Application
Send Message
Related Products

Introduction

XGUF Series Gas Ultrasonic Flow Meter is produced by advanced German technology. All its key components are imported from original equipment, featuring high reliability and long service life. It is a new type of precision measuring instrument with high precision and high reliability. It can be widely applied to gas flow measurement in urban gas, petroleum, chemical industry, electric power, metallurgy and other industries.

Specification

Caliber (mm)	25	32	40	50	80	100	150	200
Flow Range (m3/h)	1~40	5~50	6~100	4~160	8~400	16~700	20~1400	36~2000
Accuracy	1.0%
Repeatability	Less than 0.2% of basic error absolute value
Working Pressure	1.6Mpa, 2.5Mpa, 4.0Mpa, etc.
(MPa)	Special pressure please double check
Application Condition	Environment temperature: -20℃~+60℃
	Relative humidity: 5%~95%
	Medium temperature: -30℃~+80℃
	Atmospheric pressure: 70KPa~106KPa
Working Power	24VDC, dual power supply(24V+3.6v, 12V+3.6V)
Output Signal	4-20mA, pulse, alarm, RS485, HART, etc.
Applicable Medium	Most kinds of gases(please contact our sales to check)
Proof	Rain-proof and moisture-proof

Main Features

Made with German Advanced Technology Multiplex Dual Channel and Six Channel Measurement Eddy Current and Asymmetric Flow Detection Laminated shielding of electric and magnetic fields, high noise immunity Zero drift automatic correction, accuracy is not affected by the environment Measurement accuracy grade: 1.0 Ultra-wide range ratio The metering range can cover Roots meter and turbine meter. Double backup lithium battery power supply High precision temperature and pressure compensation, volume correction Intelligent switching of various gas working conditions and standard temperature and pressure Mass storage, can save data for one year Intelligent fault detection, fault alarm Maintenance-free, cleaning-free, long service life The meter can be rotated 180 degrees to facilitate reading.

Application：

Natural gas trading
Petroleum, chemical, electric power, metallurgy industry
Nitrogen gas
Compressed air
Blast furnace gas, the cold wind, combustion-supporting air, mixed gas, flue gas, recycle gas etc

Send us a message

Related Products

Integrated vortex flow meter

Integrated vortex flow meter works based on Carmen and Strouhal relevant spiral produce and on the theory of the flow relationship. Vortex flow meters measure flows of liquid, gas and steam by detecting the frequency at which vortices are alternatively shed from a bluff body.

Gas Ultrasonic Flow Meter

Gas ultrasonic flowmeter is an accurate and stable instrument for measuring most kinds of dry gases, it doesn't need any maintenance .

Radar level meter

Radar level meter transmit high-frequency microwave pulses and receive pulses back through the antenna system. Radar waves travel at the speed of light and encounter the surface of the measured medium.

Radar level meter

Turbine flow meter

Over the years, FELIX Turbine Flow Meter has been commissioned in many parts of the world, received praise from end-users and industrial leaders.

Ultrasonic level meter

The Ultrasonic level meter is instrument of measured material level, which is non-contact, high reliability, cost-effective, easy to install and maintain.It meets the requirementsofmateriallevel withoutthe contactand owns the independent property rights with development for many years by ourcompany.